Lets integrate dependable BLE to MQTT IoT gateway into your system. The GL iNet GL S10 is a compact and important result erected to meet your requirements. Known for its low power consumption and effective performance, this small yet potent device is perfect for transmitting Bluetooth Low Energy (BLE) data to MQTT waiters via WiFi. Whether you are an inventor or an IoT sucker, GL S10 setup guide is straightforward and does n’t bear complex specialized knowledge. This setup companion is precisely written for newcomers and offers a complete walkthrough to get your GL S10 over and running.

About GL iNet GL S10

Before jumping into the setup, let’s compactly understand the product. The GL S10 is a BLE gateway device developed by GL iNet. Its main function is to scan nearby BLE devices and forward the data to an MQTT server via WiFi It supports MQTT, BLE 5.0, and comes with an onboard firmware that makes integration with colorful platforms easy. This bitsy device is frequently used in smart home setups, artificial surroundings, and healthcare monitoring systems, where real time BLE data transmission is essential.

Before GL S10 Setup

Make sure to gather the following essentials before starting the full GL S10 setup process.

• GL iNet GL S10 device
• Power appendage or USB harborage
• Working WiFi network
• Computer or smartphone with a web cybersurfer

Access to your MQTT garçon credentials( host, harborage, username, and word if applicable)

Step by Step companion to Set Up GL S10

Power Up the Device

First effects first, unbox your GL S10 and connect it to a power source using a USB string and appendage. Plug the USB string into the device and the appendage into a power outlet. Staying for the device to bobble up generally takes 20 to 30 seconds. You’ll notice a small LED index on the device. When powered, the LED will turn on and begin to flash, showing that the device is active and ready for the coming way.

Connect to the Device’s Network

The GL S10 automatically broadcasts a WiFi signal. You’ll need to connect your computer or smartphone to this signal

• Look for a WiFi network named commodity like GL S10 XXXX in your device’s available WiFi list.
• Connect to it using the dereliction word, which is generally goodlife.
• Once connected, you’re now ready to pierce the web operation press.

Access the Web Interface

Launch a web cybersurfer and type in the dereliction IP address 192.168.8.1 in the address bar. GL S10 setup guide interface will come up from where you can configure the device.

• The dereliction username is admin
• The dereliction word is admin( or occasionally it may ask you to produce your own word during the first login)
• Formerly logged in, you’ll enter the device’s web interface where you can configure WiFi and MQTT settings.

Connect to a WiFi Network

The next step is to connect your GL S10 to your WiFi network so it can communicate with your MQTT garçon.

• In the interface, go to the Network Settings section.
• Select WiFi Station Mode.
• Overlook available WiFi networks and elect your home or office network.
• Enter the WiFi word and connect.

The GL S10 will dissociate from your device’s WiFi temporarily as it switches over to your original network. Make sure to reconnect your computer or smartphone to the same network your GL S10 is now connected to.

Configure MQTT Settings

This is the most important part of setting up the MQTT configuration.

• Navigate to the MQTT Settings tab.
• Fill in your garçon details
• MQTT Garçon IP or URL
• Port Number 
• Username and word( if needed)
• Content to publish BLE data
• Save the settings formerly done.

Test the MQTT connection status using web UI. However, your device is successfully linked to the MQTT broker, If the status shows connected.

Launch BLE Scanning

Once your MQTT configuration is set, enable BLE scanning on the device. 

• Go to the BLE Settings section. 
• Enable scanning. 
• Voluntarily set scanning intervals and pollutants to concentrate on specific BLE bias or signals. 

In real time spam, BLE data will now be collected. Also it forwarded to the configured MQTT broker.

Test and Monitor

Use MQTT customer tools like MQTT Explorer or Mosquitto to subscribe to the content you configured before. This will let you see real time data being pushed from your GL S10 to the MQTT garçon. Try placing a BLE device (like a fitness shamus or detector) near the GL S10 to test if it’s landing the signals duly.

Final Words

GL iNet GL S10 setup might feel like a specialized task, but when broken down into easy ways, indeed newcomers can get it working within twinkles. This low cost, high performing device offers flawless communication between BLE bias and MQTT brokers, making it a precious asset for any IoT setup. Whether you are covering temperature detectors in a storehouse or erecting a smart home result, the GL S10 setup delivers dependable performance and flexibility. Follow this companion precisely and enjoy a smooth setup experience with your new IoT gateway.